We have started to see OEM fuel rails fail at the non serviceable crossover fuel line.  Causing fuel leaks and creating fire hazards.  The option was to replace it with another OEM fuel rail as you can’t just buy a new line.  We felt we could do better, and we did!  This is the new NRW Design billet fuel rail that offers more flow to your injectors and is completely serviceable using Racetronix AN fittings and Radium EFI hoses. (Gas and E85 compatible) Giving the customer the option of using a fuel pressure gauge to check pressure at the rail or those running aftermarket stand alone tuning hardware to use a fuel pressure sensor to monitor fuel pressure at the rail.  A sexy design that allows screw drivers to be able to tighten plenum boots without getting in the way.  Completely made in house, we cut these from 6061 T6 aluminum as designed for both NA and SC applications.  You have the ability to run closed loop or even a return system for those looking to take advantage of a larger return system fuel pump setup.  These are just bad ass!  Works with OEM and aftermarket injectors, installs in under 1 hour and guaranteed to fit!  Comes with all lines and hardware.  This setup will work with a stock fuel system and our very own inline fuel filter. We continue to support our customer base the E9x M3 crowd and we thank you for the continued support!  These will be launching in the coming days as we wait for fittings and more fuel line.  Radium fuel pressure gauge will be an add on option.  Pricing will be listed also in the coming days as well.  Stay tuned!  NRW Design